Peumatic Grouting pump is designed for stress and filling grouting of cement and bentonite slurries. It is primarily used for injecting (grouting) bar anchors and the drill holes to find a way to reinforce the free rock mass. The maximum grain dimension can not exceed 0.2 mm.
Grouting pump operation and maintenance is simple, safe and reliable. This pump is used in mines working beneath troublesome circumstances as a end result of it is reliable and explosion-proof.
Basic Pneumatic Grouting pump embrace: An air inlet, the pneumatic cylinder, mounting base frame and stand, stress gauge, pumping cylinder, outlet with fast launch coupling and wheels.
How it actually works
Pneumatic stress in the air cylinder exerts a high strain on the grout mixture which leads to ejection of grout with a high strain and velocity. The valves of the air cylinder within the pump operate automatically to actuate the cylinder. The pneumatic cylinder then moves the plunger up and down to complete the pumping cycle.
Pneumatic grout pump could be pushed even with out Electrical power provide in distant areas by utilizing engine driven compressor.
pressure gauge octa is majorly utilized in construction and mining business for injecting material into wide and medium measurement gap in beams, columns ,basement walls and flooring, raise shaft concrete wall fill-up and so forth. In mining trade it’s used to fill up cement resolution the place there’s a gap exists between structure and rock and for soil stabilization.
Detachable design tends to simple upkeep and transportation. Challenging works like Grouting in Bridges.
READ: How hydraulic submersible pumps work
This pump is extensively utilized in tunnels, coal mine, bridges and dams, constructing basis, and different underground initiatives, and inflammable, explosive sites and different bad surroundings.
It has software in chemical business also to pump out chemical slurries.
ไดอะแฟรม ซีล is electrical energy free so, can be used at any website condition whether or not it is rural or urban.
Mining Pneumatic Grouting pump has a bigger discharge slurry adjustment range. Generally the ultimate quantity of the grouting quantity is eight or10 times of the quantity in the beginning. And the ultimate grouting quantity proves that filling is compacted.
Simply put; Pneumatic high-pressure grouting pump is specially designed for high-pressure grouting. And it adopts full hydraulic drive, it’s strain and flow could be adjusted based on the requirements of grouting,(The circulate of grouting pump is 0-100L/min, pressure of discharge is 0-10MPa).besides, This Pneumatic high-pressure grouting pump can be used for grouting single or double fluid.
High-pressure grouting pump is principally used for highways, railways, water and electricity, development, mining etc. ground/underground building.
Benefits
Mining Pneumatic Grouting pump has some great advantages of low energy consumption, small vibration, low noise, small dimension, excessive efficiency, dependable efficiency, stress and move control, lengthy life and so forth. Common mine grouting pump has pneumatic injection pump, twin fluid injection pump, extrusion injection pump and piston injection pump.
Pneumatic grout pump can be Light weight and with a wheelie design it can be carried simply. It is designed for easy operation and low maintenance. Last however not least its spare components are easily obtainable.
Share