Monoflanges combine the function of up to three valves in a particularly compact body, thanks to an accurate network of internal passages and valve chambers. But what really happens inside a monoflange valve, once installed?
In a chemical process a higher response speed is required for some control applications. ไดอะแฟรม of the variables that affect the response time may be the volume and the distance between process and instruments. If the medium to be measured is gas, and the procedure will fluctuate strongly sometimes or if the control is crucial, mounting the instrument close to the process may be the solution.
Vibrations may also be critical, for example, in case that impulse lines are linked to a vessel. The longer the hook-up, the wider may be the amplitude of the vibration causing possible failures of the nozzle. A monoflange includes one, two or three needle valves in the compact, flange-shaped body, allowing a substantial reduction in volume, dimensions, weight and potential leakage points.
Monoflange may be the solution
With respect to the requirements of the plant it really is installed in, the monoflange can incorporate one, two or three valves. In a monoflange with two valves (block & bleed), one valve (with a blue cap) isolates the procedure and the other (with a red cap) regulates the venting of the medium trapped in the instrument. That is mostly found in applications which are relatively uncritical (e.g. low pressure) or where a first shut-off valve is provided just before the monoflange.
The safest configuration, and the one we advise for aggressive media or critical operating conditions, is the three-valve monoflange or the so-called double block & bleed (DBB), which features two shut-off valves in series and something valve for venting.
Monoflange functionality
The monoflange bodies are drilled internally with holes which connect the annular valve chambers.
The following picture illustrates the procedure inside a DBB monoflange:
The flow enters the monoflange from the pipeline and stops below the first shut-off valve [1];
When the first shut-off valve [1] opens, the flow proceeds towards the second shut-off valve [2] ; when the valve [2] is open, the instrument is thus linked to the process line;
When the first shut-off valve [1] is closed, the medium trapped between valve and instrument can be discharged via the vent valve [3] through the vent outlet. Both shut-off valves [1, 2] are in an angled position, that allows the flow to feed them.
The two shut-off valves allow an improved isolation from the process: In case the initial shut-off valve does not isolate the medium properly, the next one will act as a safety means against accidental leaks. Occasionally, customer specifications don’t allow the medium to stay touch with the instrument when it is not measuring. That is why the medium shall be discharged using the vent line. In other cases ? as a result of vent line ? instruments can be easily calibrated without dismounting them from the line.
Note
Further information on our valves are available on the WIKA website or in the video Exactly what is a monoflange? For those who have any questions, your contact will gladly help you.